Building Materials Flammability Tester

【Product introduction】:In a monomer combustion test, the material combustion can produce large amounts of smoke and dust, which pollutes the environment. Therefore, a suitable equipment is required to carry out purification treatment.

Product

News

Company:Qinsun Instruments Co., Ltd
Email：info@qinsun-lab.com
Phone：
Tell：
Address：

Building Materials Flammability Tester

Position： Home > Products > Building Materials tester

Building Materials Flammability Tester：

　In a monomer combustion test, the material combustion can produce large amounts of smoke and dust, which pollutes the environment. Therefore, a suitable equipment is required to carry out purification treatment. For this reason, our company have taken reference of a variety of forms of dust removal equipment at home and abroad to develop a new generation of dust treatment equipment combined with the actual situation of monomer combustion test together with foreign experts. The equipment can not only effectively reduce the smoke content in the pipeline in order to make the smoke emission in full compliance with national requirements, but also avoid the dust removal equipment to impact the exhaust gas flow rate.

Standards
GB/T 20284-2006 Monomer combustion test of building materials and products.

Technical Parameters

Items	Parameters
Air exhaust volume	2400 m3/h
Pressure	3000 Pa
Filter media	Non-woven fabric
Endured temperature	110℃
Filter cartridge	9 pieces
Filtering area	45m2
filter cartridge size	φ200mm×660mm
Inlet dust concentration	≤100 g/m3( standard state)
Outlet dust concentration	≤30m g/m3( standard state)
Cleaning method	Pulsed compression air
Consumption of compressed air	0.37 m3/min
Power	AC 380V, three-phase and five-wire system

Features
1. Filter-type automatic cleaning dust collector with polymer anti-high temperature electrostatic coated filter media filter cartridge;
2. With the top vertical installation, the pulse cleaning system blows dust from the top to the internal filter cartridge;
3. Cartridge has a cover flange. The area between the cover flange and the board is sealed by rubber, and fixed with bolt;
4. Cleaning method is time sequential cleaning;
5. Electrical control cabinet uses Siemens PLC control.
6. Configured high-power fan directly controls the volume flow rate of the flue.

Building Materials Flammability Tester(图1)